Sony US18650VTC4 Fits Very Well With iStick 100W
Changeable cell structure is a very big innovation Of Eleaf Series. The Eleaf iStick 100W mod With changeable 18650 cell structure, it will be safer and more convenient for users who like to carry spare cells.High-rate 18650 cells are recommended, for example, Sony US18650VTC4.
Next are somthing about Sony US18650VTC4 2100mAh 3.7V 30A High Drain Hybrid IMR Battery.
Safe for sub-ohm and/or microcoil builds. These batteries have been tested for safety under extreme stress.
Safe chemistry LiMN means no risk of venting with flame or explosion. Ideal for use in multiple cell applications. For use with high current this battery can deliver more capacity at a higher voltage than 3100 mAh cells.
Please note that due to their inherent safety, IMR cells don't have a protection circuit built in. They should never be discharged below 2.5 volts or cycle life/performance will be reduced. Maximum recommended charge voltage is 4.17V - 4.20V volts. Please check your cells with a volt meter during initial charging to be sure that your charger cuts off below this level, or cycle life will be reduced.
Next are somthing about Sony US18650VTC4 2100mAh 3.7V 30A High Drain Hybrid IMR Battery.
Safe for sub-ohm and/or microcoil builds. These batteries have been tested for safety under extreme stress.
Safe chemistry LiMN means no risk of venting with flame or explosion. Ideal for use in multiple cell applications. For use with high current this battery can deliver more capacity at a higher voltage than 3100 mAh cells.
Please note that due to their inherent safety, IMR cells don't have a protection circuit built in. They should never be discharged below 2.5 volts or cycle life/performance will be reduced. Maximum recommended charge voltage is 4.17V - 4.20V volts. Please check your cells with a volt meter during initial charging to be sure that your charger cuts off below this level, or cycle life will be reduced.
No comments